|
CUSTOM FITTING &
ACCESSORIES OF CHOICE
Custom design the tank for your operation. Need additional inlets/outlets,
sparging, re-circulation
. . . standard and custom fittings are available.
|
 |
Fittings available in a variety of shapes such as
conical gusseted (left), blade gusseted (not shown) or plain threaded
(right). Siphon drain(below left) provides maximum unloading. Full
bottom drains available. |
 |
|
 |
Vents always sized to match the discharge fittings,
assuring smooth discharge and filling of the tank. Correct vent size is
important for pressure/vacuum considerations. |
 |
|
 |
Manways provide easy access to the interior of
the tank and are
positioned on the tank wall or roof.
Sight gauges (right), float gauges or ultrasonic gauging systems are
available to correctly monitor inventory of product . |
 |
|
 |
Heavy-duty base anchors and side anchor
loops are available. Tank diameter, overall height, wind load
and seismeic considerations are all variables that determine the type
and number of anchor lugs needed.
Lift lugs (not shown) are provided to
properly handle tanks in the loading/unloading process and to
position the tank in the containment structure.
|
 |
| |
Items shown above are typical.
Fittings installed may vary in appearance.
|
|
|
|
PRODUCTS STORED IN FIBERGLASS
TANKS
Following is a partial list of products that can be stored in
Fiberglass Tanks
| 28% or 32% UAN |
Fertilizer Solutions |
Phosphoric Acid |
| |
(10-34-0, 3-10-30, 7-21-7, etc.) |
|
| Ammonium Sulfate |
Ammonium Thiosulfate |
Aqua Ammonia |
| Ammonium Nitrate |
Ammonium Bisulfite |
N-pHURIC 15/49 |
| Potassium Carbonate |
Potassium Hydroxide |
Potassium Phosphate |
| |
|
|
| NOTE: Resin, corrosion barrier & wall
structure may vary depending on product stored |
|
|
|
