Bulk seed handling has greatly increased and planting time is more
valuable now than ever before. While increased yields are
available with seed treatment, growers will not always take the additional
time to treat the seed.
The AUTOMATIC seed treaters by Enviropac, with HANDS FREE
operation, match this system to the new bulk handling methods. |
|
Motor &
Gearbox
The treater is driven by a low RPM high torque gearbox & 12 volt motor. Easy seed cart field mount with the universal mounting bracket.
Mounts directly to the cart for direct product application.
|
Specialized Metering System is designed to
adjust the
flow rate for varied products & application rates. Also, the blade design,
with agitator spike,
helps eliminate product bridging.
|
|
"Hands Free" Operation
Hands-Free operation takes place with the
automatic on/off switch mounted in the
discharge
conveyor - when the
conveyor runs - the seed treater runs! Shuts off when the conveyor is
off. Convenient 3-way switch is provided at the operator platform.
Connects to battery power with 50' wiring harness. Harness has
"weather-tight" plugs |
USE & OPERATION
Mounts directly to bulk wagons. Metering gate & blade dispense product
at a consistent rate to match the conveyor capacity. 1 1/4" discharge hose
places product directly onto the seed moving under the hose. The
conveyor mixes the treatment & seed as it moves through the conveyor & discharge spout.
|
|
GENERAL SPECIFICATION
- Automatic Model - Complete with 50' of wiring, battery clips,
manual on/off switch & automatic
switch.
- Direct Model - Wires direct to 12 Volt power on air systems,
drill fillers, etc. 6' wire only (NO switch or battery clips provided)
- Includes: Motor & Gearbox, Mounting Bracket, Storage Container,
Dispensing Blade & Metering Gate & Wiring as shown above.
- Capacity - Holds up to 160 oz.
- Rate -Will vary
depending on the products being dispensed.
- Products Dispensed - most dry Inoculants & Seed Treatments.
A partial list included on the product specifications
PHONE: 800/752-1414 |